Additional Sprinklers for the Garden and Landscape Sprinkler System

• Add up to 2 additional sprinklers to your Snip-n-Spray Garden and Landscape Sprinkler System
• A 5-sprinkler system performs best on water systems with 50 to 65 PSI of water pressure
• Set of 2 sprinklers

These additional sprinklers allow you to expand your Snip-n-Spray Garden and Landscape Sprinkler System, up to a maximum of five sprinklers per sprinkler system. Performs best on water systems with 50 to 65 PSI of water pressure. When setting up the sprinkler system with five sprinklers, use the Y-Connector, included in the Snip-N-Spray Garden & Landscape Sprinkler System, to make the system into the loop pattern described in the instructions, and set each sprinkler’s spray arc to 50 degrees or less.

Product Details

• Polypropylene, plastic
• 10″ L x 3″ W x 1-1/2″ deep overall, including 5-1/2″ ground stake
• Spray arc adjusts from 5 to 360 degrees
• Flow control valve on each sprinkler

• Gardener’s Supply Exclusive

Customizable Soaker Hose System Installs in Minutes, Waters Plants All Season!

• Custom Convenience: Cut-to-size to create a customized watering system 
• All-in-One Kit: Includes everything you need to water up to four 25′ rows
• Quick & Easy: Sets up in less than an hour, and saves hours of watering work all season long
• Water Wise Solution: Water more deeply & efficiently with soaker hoses

Apply water just where you want it — and not where you don’t. You can customize this convenient soaker hose system to suit your vegetable garden or any garden planted in rows. No special tools required — just use scissors to cut the hoses to the sizes you need. Snap the fittings in place and you’re ready to water. The weeping action of soaker hoses delivers water right to the roots, with minimal loss due to evaporation and runoff. Soaker hoses use up to 80% less water than sprinklers! Works best with a maximum water pressure of 10 PSI. Earth Staples, sold separately, hold soaker hoses in place.

Product Details

• Recycled rubber soaker hose, PVC garden hose, Plastic fittings
• Includes:
  • 100′ of 1/2″ soaker hose
  • 25′ of 1/2″ garden hose
  • 1 faucet adapter
  • 1 quick-connect coupler
  • 1 hose coupler
  • 1 pressure regulator
  • 3 three-way hose couplers
  • 4 end plugs

• Gardener’s Supply Exclusive

• California residents see Prop 65 warnings
  Warning! This product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Learn more at www.P65warnings.ca.gov
  

Self-Regulating Watering System Saves Time and Resources

• Saves water
• Slow-release
• Prevents surface evaporation

Take the guesswork out of watering with this clever system. Simply bury the vessel up to its neck, fill with water, cover the top with the lid, and let it get to work. The terra cotta will slowly release water into the soil allowing plant roots to take up as much as they need when they need it. Plants get ample hydration and you don’t have to worry about overwatering or losing water to surface evaporation — especially in dry climates or during water shortages.

Product Details

• Terra cotta, plastic
• Medium:
  • 13″ H x 7.87″ Dia. (bottom)
  • Holds approx 3 quarts
  • Weighs 1.1 lbs.
• Small:
  • 7.1″ H x 4.7″ Dia. (bottom)
  • Holds approx 1 quart
  • Weighs .7 lbs.

Customizable Landscape Soaker Hose System — Complete Kit Installs in Minutes, Waters Plants All Season!

• Easily create a convenient watering system for trees, shrubs, hedges and other landscape plantings
• Kit includes everything you need!
• Makes up to 10 watering zones
• Set it up in less than an hour, leave it in place for easy watering all season long

Protect your landscape investments! With our Landscape Snip-n-Drip Soaker System you can apply water just where you want it — and not where you don’t. No special tools required — just use scissors to cut the hoses to the sizes you need. Snap the fittings in place and you’re ready to water. The weeping action of soaker hoses delivers water right to the roots, with minimal loss due to evaporation and runoff. Soaker hoses use up to 80% less water than sprinklers! Works best with a maximum water pressure of 10 PSI. Earth Staples, sold separately, hold soaker hoses in place.

Product Details

• PVC garden hose, recycled rubber soaker hose, plastic fittings
• Includes:
• 100′ of 1/2″ soaker hose
• 50′ of 1/2″ garden hose
• 20 hose couplers
• 1 faucet adapter
• 1 quick-connect coupler
• 1 pressure regulator
• 1 end cap with coupler
• California residents see Prop 65 warnings Warning! This product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Learn more at www.P65warnings.ca.gov

• Gardener’s Supply Exclusive

Customizable Raised Bed Soaker Hose System — Complete Kit Installs in Minutes, Waters Plants All Season!

• Easily create an efficient and convenient watering system for your raised bed
• Perfect for Elevated Raised Beds and VegTrug™ Patio Gardens, too
• Kit includes everything you need!
• Set it up in minutes, and then leave it in place for easy watering all season long

Apply water just where you want it — and not where you don’t. With the Snip-n-Drip Raised Bed Soaker System you can easily create a convenient and streamlined watering system for your raised bed or elevated bed. Customizable to fit any raised bed up to 4′ high. No special tools required — just use scissors to cut the hoses to the sizes you need. Snap the fittings in place and you’re ready to water. The weeping action of soaker hoses delivers water right to the roots, with minimal loss due to evaporation or runoff. Soaker hoses use up to 80% less water than sprinklers! Works best with a maximum water pressure of 10 PSI. Earth Staples, sold separately, hold soaker hoses in place.

Product Details

• PVC garden hose, recycled rubber soaker hose, plastic fittings
• Includes:
  • 25′ of 1/2″ soaker hose
  • 4′ of 1/2″ garden hose
  • 1 quick-connect angle coupler
  • 1 threaded angle coupler
  • 1 pressure regulator
  • 1 end plug
• California residents see Prop 65 warnings Warning! This product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Learn more at www.P65warnings.ca.gov

• Gardener’s Supply Exclusive

Add a Raised Bed to Your Snip-n-Drip with Angle Connectors

• Link a Raised Bed to your existing soaker hose system
• Pivots 180 degrees so you can position it at any angle
• Easy, no-tools installation

Use Snip-n-Drip Angle Connectors to link additional raised beds to an existing Raised Bed Snip-n-Drip Soaker System or Original Snip-n-Drip Soaker System. Each connector pivots 180 degrees so you can position it as necessary to run hose up and over the side of a raised bed. Coupler accepts both 1/2″ Snip-n-Drip Garden Hose and 1/2″ Snip-n-Drip Soaker Hose. Hoses not included.

Product Details

• Plastic
• 5″ L x 1-1/2″ W
• Pivots 180 degrees
• Coupler accepts both 1/2″ Snip-n-Drip Garden Hose and 1/2″ Snip-n-Drip Soaker Hose

• Gardener’s Supply Exclusive

Additional End Caps for Your Snip-n-Drip Soaker System

• Extra or replacement end caps
• Easy, no-tools installation
• Set of 2

Designed for use with our Snip-n-Drip Soaker System, these end caps are handy when you are customizing your system, or use them as replacement parts. Each end cap has a connector that will accept 1/2” Snip-n-Drip Soaker Hose. Easy to install and re-useable. Removing the end cap makes it easy to drain the system at the end of the season.

Product Details

• ABS polypropylene plastic

• Gardener’s Supply Exclusive

Additional Quick Connect and Faucet Adapter for Your Snip-n-Drip Soaker System

• Includes quick connect and faucet adapter
• Easy, no-tools installation

Designed for use with our Snip-n-Drip Soaker System, this quick connect coupler has one end that screws onto a faucet or the end of your hose, while the other end accepts 1/2” Snip-n-Drip garden or soaker hose. Handy when you are customizing your system, or use as replacement parts. Easy to install and reuseable.

Product Details

• ABS polypropylene plastic

• Gardener’s Supply Exclusive

Snip-n-Drip Raised Bed Connector Kit

• Link an additional Raised Bed to your existing Raised Bed Snip-n-Drip Soaker System
• Kit includes 4 angle connectors and 12′ of Snip-n-Drip Garden Hose
• Raised Bed Snip-n-Drip Soaker System sold separately
• Additional soaker hose sold separately

This kit allows you to water two raised beds from one Raised Bed Snip-n-Drip Soaker System, sold separately. The kit includes a set of four Snip-n-Drip Angle Connectors. Each angle connector pivots 180 degrees so you can position it at any angle. Connectors have couplers at each end that will accept either 1/2” Snip-n-Drip Garden Hose or 1/2” Snip-n-Drip Soaker Hose. We have included 12 feet of Snip-n-Drip Garden Hose to get you to your next raised bed. If you do not have enough soaker hose left from the first bed you will need to purchase our Snip-n-Drip Soaker Hose.

Product Details

• Easy, no-tools installation
• Plastic connectors, PVC hose
• Connectors are 5″ L x 1-1/2″ W and pivot 180 degrees
• Couplers accept both 1/2″ Snip-n-Drip Garden Hose and 1/2″ Snip-n-Drip Soaker Hose
• Snip-n-Drip Garden Hose is 12′ L
• California residents see Prop 65 warnings Warning! This product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Learn more at www.P65warnings.ca.gov

• Gardener’s Supply Exclusive

DIY Above Ground Sprinkler System Provides More Uniform Watering

• Improved design offers better coverage
• Sprinklers adjust to spray in a 5- to 360-degree pattern
• Individual flow control on each sprinkler
• Easy-to-install kit includes 3 sprinklers
• Waters up to 400 square feet

New sprinklers adjust to spray in a 5- to 360-degree pattern, with flow control valves to fine-tune water output for uniform coverage. Set includes 50′ of hose, 3 rotor sprinklers, 3 end caps, 1 hose coupler and 1 Y-connector. Use scissors to cut the hose to the lengths you need, then attach sprinklers. Waters 400 square feet. Y-Connector provides additional opportunity to customize your system. You can create two watering zones or create a loop for more even water flow across all sprinklers.

Product Details

• PVC garden hose, polypropylene, plastic
• Includes 50′ of hose, 3 rotor sprinklers, 3 end caps, 1 hose coupler and 1 Y-connector
• Sprinklers’ spray arc adjusts from 5 to 360 degrees
• Flow control valve on each sprinkler
• Sprinklers are 10″ L x 3″ W x 1-1/2″ deep overall, including 5-1/2″ ground stake
• We recommend spacing sprinklers 10 feet apart
• Performs best on water systems with 50 to 65 PSI of water pressure

• Gardener’s Supply Exclusive